3/4" & 1" Filter Regulator Models 210FR & 310FR

210FR 3/4" & 1" Aluminium Filter Regulators

The 210FR model series from ID Insert Deal Srl, are aluminium filter regulators in 2 sizes: 3/4" and 1". Larger pipe connection sizes are options including 1.25" and 1.5" in both BSP or NPT.

The standard pressure rating is 30bar but when fitted with an automatic drain, the maximum inlet pressure is 16bar. Outlet pressure ranges are 0.2...1.5bar, 0.3...3bar, 0.8...8bar and 1.5...15bar through a balanced valve with composite PTFE/NBR elastomer diaphragm. As standard, the 210FR employs a relieving regulator design but non-relieving versions are available for combustible gases and liquids. Filter element options are 50 microns or 5 microns.

Options including cleaned and degreased for oxygen service, pre-set or fixed outlet pressures, FDA approved seals, flanged connections and many others. Please contact us to discuss your requirements.

310FR 3/4" & 1" Stainless Steel Filter Regulators

The 310FR model series from ID Insert Deal Srl, are 316L stainless steel filter regulators in 2 sizes: 3/4" and 1". Larger pipe connection sizes are options including 1.25" and 1.5" in both BSP or NPT. 

The standard pressure rating is 30bar but higher inlet pressures of up to 50bar are available although when fitted with an automatic drain, the maximum inlet pressure is 16bar. Outlet pressure ranges are 0.2...1.5bar, 0.3...3bar, 0.8...8bar and 1.5...15bar through a balanced valve with composite PTFE/NBR elastomer diaphragm. As standard, the 310FR employs a relieving regulator design but non-relieving versions are available for combustible gases and liquids. Filter element options are 50 microns or 5 microns.

PED, EAC-Ex and ATEX certifications are available for these filter regulators. Options including cleaned and degreased for oxygen service, pre-set or fixed outlet pressures, FDA approved seals, flanged connections and many others. Please contact us to discuss your requirements.