High Pressure Regulator Models: R1100, R31100 & QM1100

R1100 Brass High Pressure Regulator for Air, Gases or Liquids

The R1100 from ID Insert Deal Srl, is a brass high pressure regulator designed for direct cylinder mounting or high pressure manifold systems. The standard pressure rating is 220bar but higher pressures of up to 300bar or 400bar are available on demand. Outlet pressure ranges cover 0.8...8bar and 1.5...15bar with a composite PTFE/NBR elastomer diaphragm operator and 3...30bar, 5...50bar, 10...100bar, 20...200bar with piston design. The flow coefficient for R1100 is Kv 0.15Nm³/h or Cv 0.18 US gal/min.

The R1100 regulator has a range of connection options to suit industrial gas cylinders, manifolds and pipe threads. The standard outlet connection is G3/8" and NPT or 1/2" are options. Standard inlet connections are as follows although others such as DIN 477, CGA V0-1, NF E29-650 are possible:

• UNI 11144 No.1H for Hydrogen (H2) or Methane (CH4)
• UNI 11144 No.2 for Carbon Dioxide (CO2) or Oxygen (O2)
• UNI 11144 No.5 for Nitrogen (N2)
• UNI 11144 No.6 for Air
• UNI 11144 No.7 for Acetylene (C2H2)
• UNI 11144 No.8 for Helium (He) or Argon (Ar)
• UNI 11144 No.9 for Nitrous Oxide (N2O)
• Manifold connection
• G1/2"
• 1/2"NPT
• G3/8"
• 3/8"NPT

PED, ATEX and EAC Ex certifications are all available for R1100. Options including relieving design for compressed air, wall mounting bracket, pre-set or fixed outlet pressures, FDA approved seals and many others. Please contact us to discuss your requirements.

R31100 Stainless Steel High Pressure Regulator for Air, Gases or Liquids

The R31100 from ID Insert Deal Srl, is a stainless steel high pressure regulator designed for direct cylinder mounting or high pressure manifold systems. The standard pressure rating is 220bar but higher pressures of up to 300bar or 400bar are available on demand. Outlet pressure ranges cover 0.8...8bar and 1.5...15bar with a 316L stainless steel diaphragm operator and 3...30bar, 5...50bar, 10...100bar, 20...200bar with piston design. For lower pressure liquid or air relieving applications, the stainless steel diaphragm is replaced by a composite PTFE/NBR elastomer with PTFE on the fluid contact side. The flow coefficient for R31100 is Kv 0.15Nm³/h or Cv 0.18 US gal/min.

The R31100 regulator has a range of connection options to suit industrial gas cylinders, manifolds and pipe threads. The standard outlet connection is G3/8" and NPT or 1/2" are options. Standard inlet connections are as follows although others such as DIN 477, CGA V0-1, NF E29-650 are possible:

UNI 11144 No.1H for Hydrogen (H2) or Methane (CH4)

UNI 11144 No.2 for Carbon Dioxide (CO2) or Oxygen (O2)

UNI 11144 No.5 for Nitrogen (N2)

UNI 11144 No.6 for Air

UNI 11144 No.7 for Acetylene (C2H2)

UNI 11144 No.8 for Helium (He) or Argon (Ar)

UNI 11144 No.9 for Nitrous Oxide (N2O)

Manifold connection

G1/2"

1/2"NPT

G3/8"

3/8"NPT

PED, ATEX and EAC Ex certifications are all available for R31100. Options including relieving design for compressed air, wall mounting bracket, pre-set or fixed outlet pressures, FDA approved seals and many others. MOCA EC 1935/2004 certification for use on food related processes is now available. Please contact us to discuss your requirements.

QM1100 & QM31100 Dual Inlet High Pressure Regulator Manifold

The QM1100 from ID Insert Deal Srl, is a brass high pressure regulator manifold with two inlets. The standard pressure rating is 220bar and outlet pressure ranges cover 0.8...8bar and 1.5...15bar with a composite PTFE/NBR elastomer diaphragm operator and 3...30bar, 5...50bar, 10...100bar, 20...200bar with piston design. QM1100 is based on a chrome plated brass R1100 regulator but with inlet connections as W20 x 1/14" SX or W21.7 x 1/14"  and non return valves on each inlet. QM31100 is the same but based on the R31100 316L stainless steel regulator. The regulator, gauges and inlet valves are mounted on a stainless steel frame ready for installation, with G1/2" outlet ports as standard.

QM1100 and QM31200 are suitable for a range of common industrial gases such as Hydrogen (H2), Methane (CH4), Carbon Dioxide (CO2), Oxygen (O2), Nitrogen (N2), Air, Helium (He), Argon (Ar), Nitrous Oxide (N2O) and many more. QM31100 is certified for Food Safe applications according to EC1935/2004 Materials in Contact with Food (MOCA).

PED, and ATEX and certifications are all available for QM1100 and QM31100. Options including pre-heaters, pressure switches, alarms, FDA approved seals and bleeder micro regulators for venting. Please contact us to discuss your requirements.