P15 1/2″-2″ Direct Acting Low Pressure Reducing Valves for Liquids or Gases

P15 Series Low Pressure Reducing Valve

The P15 series direct acting low pressure reducing valve is a well proven design from Z Tide. The large diaphragm improves accuracy when controlling low pressures. Available in both flanged and screwed BSP ports, the P15 RELT & RELF low pressure reducing valve is suitable for many applications.

  • Reducing range: 0.2-1.5bar or 0.6-2.0bar
  • Maximum inlet pressure: 10bar
  • Body: 316 stainless steel
  • Ports: 1/2″, 3/4″, 1″, 1 1/2″, 2″ BSP
  • DN15, DN20, DN25, DN40, DN50 flanged PN16
  • Elastomer: VITON

The P15 RELT RELF is ideally suited for process automation control where a low pressure between 0.2 and 1.5 bar is required. The balanced piston design provides a constant outlet pressure even when the inlet pressure is unstable. The P15 responds quickly and accurately. The supplied pressure gauge indicates the outlet pressure. Contact us for replacement internal parts and service kits and advice.

Data Sheet

Not sure which valve or measurement solution is best?
Use our experience to guide you...

For a deeper understanding of which valve or instrument would be best for you please call or email us now so that we can save you time and ensure you can make a truly objective decision for your company.

Contact Us

Get in Touch

+44 (0) 1443 772500 / 02922 780798

Red Dragon Limited T/A
Measure Monitor Control
Unit 15 Abergorki Industrial
Estate
Ynyswen Road
Treorchy
South Wales
CF42 6DL
United Kingdom
EORI: GB791056521000

Got a Question?

Need assistance with a product or an enquiry? Fill in the form below and we will get in touch with you as soon as possible:

The contact form requires that you configure reCAPTCHA in the site configuration.

The contact form requires that you select an email template.