3/8" & 1/2" Filter Regulator Models 412 & 312FR

FR38MD 3/8" & FR12MD 1/2" Filter Regulators Model 412

The 412 series filter regulators from Insert Deal Srl, comprise the FR38MD and FR12MD models in 3/8” and 1/2” sizes respectively. These form part of their Modular range of filters, regulators, filter regulators and lubricators to provide effective compressed air preparation solutions from 1/8” to 2”. The high quality aluminium alloy casting allows operation with inlet pressures up to 30bar with a manual drain and outlet ranges of 0.2...1.5bar, 0.3...3bar, 0.8...8bar or 1.5...15bar. Filter element size options are 5 microns or 50 microns. Automatic condensate drains are available subject to a 16bar max inlet pressure. These filter regulators are of the relieving type and intended for compressed air applications. EAC Ex certification is available as an option.

312FR 3/8" & 1/2" Stainless Steel Filter Regulators

The 312FR model series from ID Insert Deal Srl, are 316L stainless steel filter regulators in 2 sizes: 3/8" and 1/2".

The standard pressure rating is 50bar but higher inlet pressures of up to 80bar are available although when fitted with an automatic drain, the maximum inlet pressure is 16bar. Outlet pressure ranges are 0.2...1.5bar, 0.3...3bar, 0.8...8bar and 1.5...15bar through a balanced valve with composite PTFE/NBR elastomer diaphragm. As standard, the 312FR employs a relieving regulator design but non-relieving versions are available for combustible gases and liquids. Filter element options are 50 microns, 25 microns or 5 microns.

PED and ATEX certifications are available for these filter regulators. Options including cleaned and degreased for oxygen service, pre-set or fixed outlet pressures, FDA approved seals and many others. Please contact us to discuss your requirements.